Anshan Shenyuanhua Material Trade Co., Ltd.
Main products:Brick,PC Steel Strand,Spring
Products
Contact Us
  • Contact Person : Ms. Jiang Xuan
  • Company Name : Anshan Shenyuanhua Material Trade Co., Ltd.
  • Tel : 86-412-6352555
  • Fax : 86-412-6344111
  • Address : Liaoning,Anshan,No 65, 325 Jia,Yuan Lin Road, Tiedong District, Anshan City, Liaoning Province. China
  • Country/Region : China
  • Zip : 114000

Thermal Insulation Brick

Thermal Insulation Brick
Product Detailed
240x260x90mm 240x290x90mm compressive strength >MU3.5 wall heat transmission coefficient:0.31--0.48

Thermal Insulation Brick

Product specification and masonry method

Wall thickness

(mm)

Dimension

(mm)

Masonry method

Wall heat transmission coefficient

(W/m2·k)

280

240x260x90

Full-filling, ‘row-lock wall formed by stretcher course and header course in turn’, the wall is internally sandwiched with a polystyrene board of 80mm thickness.

0.35

Half-filling, ‘row-loc wall formed by stretcher course and header course in turn’, the wall is internally sandwiched with polystyrene board of 80mm thickness.

0.48

Full-filling, common stretcher course masonry method.

0.41

310

240x290x90

Full-filling, ‘row-lock wall formed by stretcher course and header course in turn’, the wall is internally sandwiched with a polystyrene board of 90mm thickness.

0.31

Half-filling, ‘row-lock wall formed by stretcher course and header course in turn’, the wall is internally sandwiched with a polystyrene board of 90mm thickness.

0.44

Full-filling, common stretcher course masonry method

0.36

 Product Characteristics

Good heat preserving performance

After being on-site traced and tested by the national construction material test centre, the average heat conducting coefficient of each kind of masonry wall made of Non-load-bearing thermal is less than 0.50, which may accord with the requirement of energy conservation for above 65%.

High engineering quality

Non-load-bearing thermal with average compressive strength of above MU3.5, low water absorption and small dry shrinkage may solve the common quality fault that the non-load bearing wall surface cracks and the big problem that the externally hung heat insulating material and the main body construction cannot be synchronized in service life perfectly.

Low construction

Non-load-bearing thermal is convenient in construction without external heat insulating process, so as to reduce the construction cost by 30% and largely increase the secure performance of the construction.

  

Thermal Insulation Brick



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.